CARRIER CONDENSOR FAN MOTORS

fan motors are used to power the fans that are utilized in various types of condensors. Condensors are refrigeration devices that accept vaporized refrigerant from an evaporator and then compress and liquefy it for use in the system. In general there are two types of condensers- an air conditioning condenser and a refrigeration condenser. An air conditioning condenser is used to convert hot and high pressure refrigerant gas to a subcooled liquid. A heat exchange condenser located in a refrigeration system is known as a refrigeration condensor.

Condensors consist of a condensor coil, compressor, fan, and control. In an air conditioning condenser, the refrigerant is compressed and runs through a series of tubes to remove as much heat as possible. The refrigerant is then piped to an evaporator coil as a warm liquid. Expansion of the compressed liquid causes it to cool and as the air passes over the coil, heat is extracted. Error! Hyperlink reference not valid. manufactures Error! Hyperlink reference not valid. for different areas of use. The company's condensor fan motors power the fans used in condensor units in air conditioning applications as well as refrigeration applications.

A condensor unit used in central air conditioning systems typically has a heat exchanger section to cool down and condense incoming refrigerant vapor into liquid, a compressor to raise the pressure of the refrigerant and move it along, and a fan for blowing outside air through the heat exchanger section to cool the refrigerant inside. A typical configuration of such a condensor unit is as follows: The heat exchanger section wraps around the sides of the unit with the compressor inside. In this heat exchanger section, the refrigerant goes through multiple tube passes, which are surrounded by heat transfer fins through which cooling air can move from outside to inside the unit.

There is a motorized fan inside the condensor unit near the top, which is covered by some grating to keep any objects from accidentally falling inside on the fan. The fan is used to blow the outside cooling air in through the heat exchange section at the sides and out the top through the grating. These condensor units are located on the outside of the building they are trying to cool, with tubing between the unit and building, one for vapor refrigerant entering and another for liquid refrigerant leaving the unit. An electric power supply is needed for the compressor and fan inside the unit.

fan motors support condensors that are used for commercial and industrial purposes. Condensors are used in copper alloys, power stations, feed water heater, shipping, and petrochemicals. fan motor models manufactured for Carrier/Bryant/BDP/Payne include HC31GE232, HC33GE233, CFM231, HC35GE235, HC35GE237, HC35VE230, HC37GE210, HC38GE233, HC39GE208, HC39GE237, HC39VL701, HC37VE209, HC37VE230, HC37VE252, HC41AE231, HC42VL208, etc.

Carrier is one of the largest heating and air conditioning companies in the world. Carrier controls company are manufacturers of Carrier thermostats, Carrier heat pumps, and Carrier ventilators, among a host of other products. At HVACPLUS, these are some of the HVAC products available on our online parts supply warehouse. Aside from Carrier, we have products available from many other top named and well respected manufacturers; we are here to help you find the right replacement for all your HVAC requirements.