ORDER MCQUAY THERMOSTAT

Buy Order McQuay Thermostat

Thermostats are devices that help control temperature. Programmable thermostats are those that give the user the ability to create automatic settings to keep the thermostat temperature regular and constant, sometimes at various points during the day. Sometimes they are referred to as setback or clock thermostats. McQuay is one of the respectable producers of these thermostats, which are known for their high quality and dependability.

THE WAY A MCQUAY THERMOSTAT OPERATES

1. Thermostats manufactured by McQuay have "heat" and "cool" settings, in addition to an "off" setting. These settings can be changed manually.

The "heat" setting allows only for the output of heat. The "off" setting means that neither heat nor cool output settings are in operation. Please Note: The thermostats that have only two options or those that do not have switches use a load transfer mechanism when the heating or cooling settings are activated. This is vital to prevent failure of the system and damage to the equipment.

2. Thermostats manufactured by McQuay have also have an "on" and an "off" switch. This features means that the changeover from heating to cooling occurs automatically. The "on" setting means that the output of heating and cooling is operational. These outputs are dependent on the set point and ambient temperature relationship. The "off" setting means that neither the heating nor cooling outputs are activated.

TIPS FOR PUTTING YOUR MCQUAY HOUSEHOLD THERMOSTAT IN THE BEST POSSIBLE PLACE

Be certain that wherever you place your thermostat, it is far away from the vents that deliver heat and cool air to the room. The thermostat ought to be placed in an area where there is adequate air flow. The best place to put this kind of thermostat, provided you are using a system designed for single zones, is in a common hallway between the living room and bedrooms, because these rooms often share one zone. If your hallways are equipped with doors, leave them open when the thermostat is in use. The thermostat should not be placed near the heating or cooling source to be regulated, otherwise the thermostat could begin to "short-cycle" and may stop and start. The equipment may also not last if this occurs. In order to conserve energy with a system designed for multiple zones, they should have individual places in the home under their control, allowing for rooms to have varying temperatures by changing the heating and cooling settings.