HVAC CONDENSER COILS

Contact Us: Phone: (215) 525-1119 or "Request Quote for Product" The replacement s are tubes to carry the refrigerant through so it can be cooled. All replacement s applied on stainless steel units are supplied with stainless steel casings. In addition to the casing, our various fin and tube combinations provide flexibility for wide fin spacing. This allows the surface to be cleaned more easily, minimizing dirt and dust build up inside the , and allows potentially corrosive particulate matter to fall through the instead of laying on the fin surface. Replacement s are usually used in , Desuper heater, and Reheat applications. The applications comprise of the replacement which takes the superheated vapor from the compressor and cools that vapor down to saturation. It then completely condenses the entire vapor into liquid, and continues to sub cool the resulting liquid to a desired temperature below saturation. The process proceeds applying reheating . This is a hot gas reheat which takes the superheated vapor from the compressor and cools the vapor down to saturation. It then continues to condense a requested percentage of that vapor to a liquid. Then comes the desuper heater which takes the superheated vapor from the compressor and cools that vapor down to a requested temperature above saturation. The replacement is constructed using the tubing with specifications ranging from 3/8" or 1/2" O.D. Copper, 5/8" O.D. Copper, Stainless Steel, or Carbon Steel. The circuiting used may be Standard one section or multiple sections. The rows may vary from 1, 2, 3, 4, 5, 6, 8, 10; 12.The fin surface may be Sine Wave (corrugated), New Ripple (peak and valley) or Flat. The casing used can be Galvanized Steel, Stainless Steel, Carbon Steel, Copper or Aluminum .Further, the connections maybe Copper Sweat, Carbon Steel or Stainless Steel. High-efficiency air-conditioning units incorporate a number of features to reduce electricity consumption. These mainly comprise of Replacement ed s. The may be made larger to reduce the condensing temperature and compression ratio. fans which are propeller fans are sized and shaped for efficient operation at full and part load. Filters and cooling are larger to reduce the airflow velocity and improve heat transfer. They are also designed to have easy access for cleaning. Replacement s can be cleaned with a replacement cleaner which has high foaming action that carries dirt, grease, etc. out from center of s .It leaves fins cleaner and brighter.