JOHNSON CONTROLS ACTUATORS 4

Buy Johnson Controls Actuators - 4

Johnson Controls Inc. creates quality and innovative products, services and solutions for their customers and their pneumatic damper actuators are no exception. As a world leader in the HVAC industry, they are sought after by suppliers and parts dealers worldwide.

Pneumatic Damper Actuators and Accessories

D-3031 Pneumatic Piston Damper Actuator

The D-3031 Pneumatic Actuator is designed primarily for damper positioning on small terminal units. Models, furnished with 1 inch (25 mm) stroke, have two movable adjustment stops to facilitate adjusting the stroke in 1/8 inch increments.

Features include:

• High power to size ratio for locations in confined spaces

• Swivel or rigid mounting options for flexible mounting configurations

• Optional mounting kits to cover any application and replacement of obsolete units

The D-3031 is designed for either swivel or rigid type face mounting to operate power fail open or power fail closed dampers. The actuator can be rotated as required to locate the air connection in the preferred position.

Accessories Selection Chart:

•D-3031-100 Mounting Bracket Kit

•D-3031-101 Type W Mounting Plate

•D-3031-102 Type W Linkage Kit with 5/16 inch crank arm for 45° movement

•DMPR-KC005 Shaft Extension Kit

Series Code Numbers:

•D-3031-3

•D-3031-4

•D-3031-18

D-3062 Pneumatic Piston Damper Actuator

The D-3062 Pneumatic Piston Damper Actuator accurately positions small dampers on Variable Air Volume (VAV) and terminal units.

Features include:

• Aluminum housing protects the diaphragm and spring from dirt and damage

• Tubular shaft accepts telescoping rods or push-pull ball joint linkage for linkage flexibility

• Actuator housing allows front or rear mounting for mounting flexibility

This type of actuator is also recommended for use on other air flow control dampers in interiors with a maximum area of 4 ft2 (such as Johnson Controls D-1300 Series Dampers).

Series Code Numbers:

•D-3062-1

•D-3062-2

•D-3062-3

•D-3062-4

•D-3062-41

Accessories Selection Chart:

•D-3062-100 Mounting Kits

•D-3062-101

•D-3062-102

•D-3062-103

•D-3153-109 Slotted Crankarm

•D-3153-101 for 1/2 in. Shaft

•D-3153-108 for 3/8 in. Shaft

•D-9999-154 Swivel Ball Joint

•D-3062-107 Push-Pull Ball Joint and Nut (5 per bag)

•D-3062-105 Mounting Kit for Round Damper

•D-3062-104 Fork Clevis w/Jam Nut 1/4 in.-20

•D-3062-106 Extension Rod, 6 in. with 1/4 in.-20 Threaded End

•D-3062-108 Rod - spade end

•D-3062-600 Push-Pull Ball Joint

•D-3073-604 Ball Joint - weather resistant

•D-9999-152 Clevis Pin #6

•D-9999-153 Twist Lock Pin #4

D-3240 Series Pneumatic Piston Damper Actuator

The D-3240 Series Pneumatic Piston Actuators are multipurpose positioning devices designed for operating inlet vanes on centrifugal fans and compressors, in direct response to the output signal of a pneumatic controller.

Features include:

• All-aluminum housing which is lightweight and non-combustible

• Swivel, single pedestal or duplex pedestal mounting options for flexible mounting configurations

These actuators can also be used on other applications that require a large amount of positioning power from a single actuator, such as large damper applications, provided that the damper is designed to withstand the high torque capabilities of the actuator.

Accessories Selection Chart:

•D-3244-100 Crank Arm

•D-3244-101 Swivel Mounting Bracket

•D-3244-618 Rubber Boot Kit

Series Code Numbers:

•D-3244-1

•D-3244-2

•D-3244-3

•D-3244-4

•D-3246-3

•D-3246-1

•D-3246-2

•D-3246-5

D-4070 Pneumatic Piston Damper Actuator

The D-4070 Two Stage Pneumatic Actuator is a multipurpose positioning device used to accurately position small dampers primarily on unit ventilators, Variable Air Volume (VAV), terminal units, and small ventilating dampers in response to output signals of a pneumatic controller or electro-pneumatic transducer.

Features include:

• 2-way swivel connection ensures nonbinding movement and full power delivery

• Glass reinforced polymer housing which is lightweight, corrosion and chemical resistant

• Telescoping Linkage for fast and flexible installation

• Economical; has 2 springs for two stage operation which functions as two separate actuators

• Designed to provide ASHRAE Cycle 11 and W controls of unit ventilators

The D-4070 is a direct replacement for existing D-3070 actuators and a functional replacement for older D-255 actuators.

Accessories Selection Chart:

•D-3073-105 Mounting Post Kit, 5 per kit

•D-3073-604 Ball Joint - weather resistant

•D-3153-103 Rod - 8-3/4 inch (222 mm) replacement

•D-3153-106 Auxiliary Mounting Bracket

•D-3153-111 E-rings for Pivot Post, 10 per kit

•D-3153-112 Mounting Nuts for Pivot Post, 10 per kit

•DMPR-KC050 Crank Arm: 7/16 inch shaft radius adjustable to 2-3/4 inch radius

•DMPR-KC051 Crank Arm: 3/8 inch shaft radius adjustable to 2-3/4 inch radius

•DMPR-KC053 Crank Arm: 1/2 inch shaft radius adjustable to 2-3/4 inch radius

•DMPR-KC054 Blade Arm Kit

•DMPR-KC102 Rod - 4 feet (122 cm)

•DMPR-KC251 Universal Mounting Bracket

•DMPR-KC300 Swivel Ball Joint, 10 per kit

Series Code Numbers:

•D-4070-1

•D-4070-2

•D-4070-6001

•D-4070-6002

D-4073 Pneumatic Piston Damper Actuator

The D-4073 Pneumatic Actuator is a multipurpose positioning device used to accurately position small dampers primarily on unit ventilator, VAV, terminal units, and small ventilating dampers in response to output signals of a pneumatic controller or electro-pneumatic transducer.

Features include:

• 2-way swivel connection ensures nonbinding movement and full power delivery

• Glass reinforced polymer housing which is lightweight, corrosion and chemical resistant

• Telescoping linkage for fast and flexible installation

This types of actuator is also recommended for use on other air flow control dampers, in interior locations, up to a maximum area of 6.75 square feet for proportional volume control and 11.7 square feet for two position actuation provided that the torque requirements are compatible with the specific application.

Accessories Selection Chart:

•D-3073-100 Rubber Boot Kit (includes ball joint and cover)

•D-3153-104 Stop Screw Kit

•D-3073-105 Mounting Post Kit, 5 per kit

•D-3073-604 Ball Joint - weather resistant

•D-3153-103 Rod - 8-3/4 in. (222 mm) replacement

•D-3153-106 Auxiliary Mounting Bracket

•D-3153-111 E-rings for Pivot Post, 10 per kit

•D-3153-112 Mounting Nuts for Pivot Post, 10 per kit

•DMPR-KC050 Crank Arm: 7/16 in. shaft radius adjustable to 2-3/4 in. radius

•DMPR-KC051 Crank Arm: 3/8 in. shaft radius adjustable to 2-3/4 in. radius

•DMPR-KC053 Crank Arm: 1/2 in. shaft radius adjustable to 2-3/4 in. radius

•DMPR-KC054 Blade Arm Kit

•DMPR-KC102 Rod - 4 feet (122 cm)

•DMPR-KC251 Universal Mounting Bracket

•DMPR-KC300 Swivel Ball Joint

•D-9502-12 Proportional Pilot Positioner Kit

Series Code Numbers:

•D-4073-1

•D-4073-2

•D-4073-3

•D-4073-4

•D-4073-5

•D-4073-6

•D-4073-7

•D-4073-6001

•D-4073-6002

•D-4073-6003

D-9502 Pneumatic Damper Actuator Positioner

The D-9502 Pneumatic Damper Actuator Positioners are precision relay devices used to adjust and maintain damper actuators in exact positions on those applications requiring precise or otherwise special damper positioning.

Features and benefits include:

• The provision of dynamic stabilization and/or sequential control

• Mounting bracket for direct attachment to actuator body

Series Code Numbers:

• D-9502-5

• D-9502-8

• D-9502-9

• D-9502-12

D-3153 Pneumatic Actuator

The D-3153 Pneumatic Actuator is a multipurpose positioning device used primarily for operating ventilating dampers in response to the output signals of a pneumatic controller or electro-pneumatic transducer.

Features include:

• All-aluminum Housing

• Telescoping Linkage

• Long Life and Reliable Design

• 2-way Swivel Head

• Agency Recognition