JOHNSON CONTROL ACTUATOR PARTS 3

Buy Johnson Control Actuator Parts - 3

Johnson Controls delivers products, services and solutions that increase energy efficiency and lower operating costs in buildings for more than one million customers. Operating from 500 branch offices in 148 countries, they are a leading provider of equipment, controls and services for heating, ventilating, air-conditioning, refrigeration and security systems.

Electric Remote Mount

M100 Series Electric

M100 Series accurately position valves, dampers and other related equipment in a variety of HVAC and industrial applications. The M100 actuator family includes five torque ratings, two spring return models, choice of control inputs, and a variety of accessories to cover any application. The actuator moves in response to input signals from a variety of electronic controllers, depending on the model selected.

The M100 Series Motor are available in five basic torque ratings

Key features include:

• Control inputs include On-Off/Floating control action or proportional control action or proportional control action

• Control inputs include On-Off/Floating control action or proportional control action

• Proportional units feature interchangeable R81 electronic interface boards enabling a variety of different proportional inputs

Series Code Numbers:

M100A

M100C

M100E

M100F

M100G

M100J

M100M

M100Q

Model Numbers:

M120

M130

M140

M150

Models include M110AAB-1, M110AGA-1, M110AGB-1, M110GGA-1, M110JGA-1, M110JGB-1, M110XGA-1, M120AAA-1, M120AAC-1, M120AGA-1, M120CGA-2 M120GGA-1, M120JAA-1, M120JGA-1, M120XGA-1, M130AAB-1, M130AGA-1, M130AGB-1, M130CGA-2, M130GGA-1, M130JGA-1, M130JGB-1, M130XGA-1, M140AAA-1, M140AGA-1, M140GGA, M140JAA-1, M140JGA-1, M140XGA-1, M150AGA, M150AGB, M150CGA-2, M150GGA-1, M150JGA-1, M150JGB-1, M150JGC-1, and M150XGA-1.

Other than M100A and M100X, all models include a solid-state drive. Order the M100 series proportional base motor with the interface board factory installed.

The M110 and M130 come equipped with spring return to normal position for switched off conditions or on system power failure.

M100A

The M100A Series Motor Actuator is used in applications where dampers or valves are to be driven fully/modulated open or closed. Its applications range from opening and closing a diverting valve, tow positioning a hot water, chilled water, or steam valve, controlling an inlet vane damper on a fan, opening and closing combustion air dampers and exhaust dampers, face and bypass damper applications to open and close the heating or cooling valve, etc.

M100C

The M100C Series Motor Actuator is used in damper and valve applications where proportional control from a digital controller is required.

M100E

The M100E Economizer Actuator has a changeover relay, refrigeration programming relay, minimum position, mixed air set-point, mixed air proportional band and actuator travel adjustment. M100E Motor control outdoor air, return air, and exhaust air dampers to maintain the proper air mix. The motor actuator allows economical use of outdoor air for natural cooling and reduces energy consumption by minimizing the compressor runtime.

M100F

The M100F Series Motor Actuator is used in damper and valve applications where proportional control from a DDC controller such as the Johnson DSC-8500 with FIC-101 interface is required.

M100G and M100H

The M100G (direct acting) and M100H (reverse acting) may accept VDC or mA inputs with “Zero” and “Span” adjustments. The boards are factory set for 0 to 10 VDC (0 to 20 mA). The M100G Motor Actuator provides Clockwise (CW) action on signal increase. The M100H provides Counterclockwise (CCW) action on a signal increase. Spring return is always CCW.

The M100G Series actuator is used in applications where dampers or valves are to be modulated open or closed. Typical applications include positioning a CD-1300 Series damper; opening and closing a diverting valve; positioning a hot water, chilled water, or steam valve; controlling an inlet vane damper on a fan, outdoor air, return air, and exhaust dampers; face and bypass control; and blade positioning for variable volume fans.

M100Q

The M100Q Series Motor Actuator is used in damper and valve applications where proportional control from an A91/T91 Thermistor Sensor input for direct or reverse acting is required. All M100Q Series are designed for use only in conjunction with operating controls.

M100J

The M100J accepts a Johnson Controls 3-wire 135 to 1000 ohm potentiometer input, a 6 to 10 VDC input or a 0 to -2 VDC electronic controller input.

M100X

The M100X Motor Actuator is provided without a factory installed R81 Series Interface Board and is not approved for new installations. By adding the appropriate R81 interface board, it becomes a replacement unit for an existing motor actuator.