BARBER COLEMAN CONTROLLERS

Buy Barber Coleman Controllers

With over one 100 years of experience in providing quality servicing and products to the market, Barber Coleman have become one of the most sought-after HVAC components all over the world.

Two of the most impressive Barber Colman ler are the Series 2000TM and the Series 3000TM. Both of which contain a large array of different types of .

Some products available in the Series 2000TM are:

  • Multi-Loop Controllers
  • Multi-loop Programmers
  • High Performance Temperature Controllers
  • Humidity Controllers
  • Environmental Chamber Controllers
  • Humidity Controllers
  • Package Boiler Controllers
  • High Stability Controllers
  • General-Purpose Controllers

Some of these products are led by PID valves, while others are motorized, therefore both electrical and gas ing applications are supported. In addition, some Barber Coleman ler models can be employed with multi-zone programming, conveying master set points to several client and holding back if temperature levels stray too far from a preset value. The company’s from these employ universal s and accept a vast range of modules and plug-ins for ing, cooling, air conditioning, refrigeration, analog retransmission and remote set-points. You can choose from a variety of models in the 2000 , such as 2704, 2604, 2604/2704f, 2404, 2404f, 2408, 2408f, 2416, 2204e, among others.

Barber Coleman Controller Series 3000TM

Series 3000TM offers the latest temperature with a user-friendly interface. Some of the are listed below which make these easy to learn and use:

  • User-Friendly Interface
  • Can Set-up Quick Start Codes
  • Automated Help System
  • An Auto-Tune Element

Other include a set-point programmer, er failure detection and a timer. The more advanced product versions from the Barber Coleman Corp 3000 Series have even greater . For example, the 3504 Barber Coleman ler provides an Input/Output system (I/O system) that allows you to measure and a large amount of es ranging from carbon potential, humidity, flow, pressure, viscosity, temperature additive dosing and many more. Models in the 3000 are: 3504, 3508, 3204, 3208, and 3216. If you are looking for the latest in , 3216 has a range of new like auto-tuning, universal s and the ing and cooling can be balanced by configuring the three outputs manually. The 3216 is perfect for commercial and industrial operations and can be used in packaging machines, chillers, and trace ing.

Barber Coleman Controller Series 7

The Barber Colman company has recently commercialized a new ler , called the Series 7. These latest use top-of-the-line technology, having a slightly different design from the 2000 or 3000 . They offer a thermocouple and RTD and are programmable with the Soft Start Set-point technology. An improved ing and chilling gives these new Barber Colman an edge on both former temperature from the company and on similar products from their other competitors.

Barber Coleman Company Series 7 Models

Let’s take a look at the successful three digit ler programmer from Series 7, called the 7SD. This ler is designed specifically for manufacturers who need rigid over their HVAC systems. The NEMA 4X faceplates ignores harsh conditions, prolonging the life of the ler in humid or dusty environments. A configurable threshold can limit output power in case the ing load changes as the temperature increases. The 7SD model has a special feature in the fact that the Auto Comp option maintains over the system, in all situations. For example if a loss of sensors occurs, the Auto Comp feature will keep the current temperature percent output for the system.

Other include:

  • The 7SD is a 1/16 DIN (OP1) plus (OP2)
  • Controller with a single 3 digit, 7 segment display, bargraph deviation display
  • Front panel LED’s to indicate ON, ON and Autotune ENABLED

Configuration and calibration protection is afforded by both a configuration password and an internal jumper for the 7SD.

Besides the 7SD model, Series 7 also includes products like the 7SM, 7SH, 7SP, 7SF, 7SC, 7EM, 7EF, 7HF, 7SP EC or the 7ES model.

The 7SM model has all the of the 7SD (except the bargraph display) but with a dual 3 digit, and a 7 segment display to show both value and setpoint.

The 7SH ler is a 7SM with /cool capability (OP2 relay = Cool). The relative cooling gain can be set from 1.0 to 0.2 (1x to 5x the ing proportional band). Configurable overlap and deadband allows customization of the 7SH for unique of /cool requirements.

The 7SP 1/16 DIN Controller/Programmer provides fully configurable ramp/soak capability in a PID ler with autotuning in which multiple setpoints, soak duration, and led ramps are required. It a dual 4 digit display, 4 front panel pushbuttons and 9 status indicators, giving the operator full information and access to profile and parameters. Programming include logic (SP1 or SP2 select) and front panel program start, event output during program execution, guaranteed soak, ramp tracking, manual mode selection, end-of-cycle indication, and configurable number of repeats and soak times. Alarms can be , deviation or band type, direct or reverse, with masking and automatic or manual reset. Light and compact, the 7SP is ideal for such applications as environmental chamber in which multiple temperature cycles are required. A NEMA 4X faceplate enables its use in dust or wash down conditions. Other key include:

  • Universal Input (7 T/C, RTD, mV, V, mA)
  • PID and Smart AT Autotuning
  • NEMA 4X, IP65
  • One 4 Segment Program with Initial Wait
  • Tracking and Guaranteed Soak
  • Logic Input for Program Start

7SF The compact Model 7SF is a dual display general purpose 1/16 DIN PID ler with autotuning and 3 configurable outputs. OP1 (logic or relay) and OP2 (relay) are for ing + or ing + cooling (air, oil or water) and OP3 (relay) is an second . Alarms can be , band or deviation type, direct or reverse, with masking and automatic or manual reset. A logic is fitted as standard, allowing remote selection of an auxiliary setpoint. The externally selected transfer between SP1 and SP2 can be a step or a ramp with two configurable rates of change (ramp up/ramp down). Bumpless Auto/Manual can be selected from the front panel. Detection of an out of range or sensor break forces the output to a safe value (Auto CompTM sensor break). The 7SF is available with optically isolated RS-485 communications in three protocols for use with supervisory systems. This easy to use instrument comes from the factory with its s already calibrated and it can be configured either from the front panel or via the communications port. NEMA 4X sealing allows it to be used in washdown or dust conditions. Features

  • Universal Input (6 T/C, RTD, mV, V, mA)
  • PID and Smart AT Autotuning
  • NEMA 4X, IP65
  • Heat/Alarm or Heat/Cool Control
  • Up to 2 Independent Alarms
  • Optional RS-485 Communications
  • Optional Heater Breakdown Alarm

The compact Model 7SC is a dual display general purpose 1/16 DIN PID ler with auto-tuning and 3 configurable outputs. It is similar to the 7SF, but with OP1 as a programmable analog output for ing, cooling or analog retransmission. OP2 (time proportioning relay) is used for ing/cooling (air, oil or water) or . OP3 can be an or a /cool output if OP2 is configured as an . Alarms can be , band or deviation type, direct or reverse, with masking and automatic or manual reset. A logic is fitted as standard, allowing remote selection of an auxiliary set point. Bump-less Auto/Manual can be selected from the front panel. Detection of an out of range or sensor break forces the output to a safe value (Auto CompTM sensor break). This model is available with optically isolated RS-485 communications in three protocols for use with supervisory systems. This easy to use instrument comes with factory calibrated s and can be configured from the front panel or via the communications port. NEMA 4X sealing allows use in washdown or dust conditions. Other important include:

  • Universal Input (7 T/C, RTD, mV, V, mA)
  • PID and Smart AT Autotuning
  • NEMA 4X, IP65
  • Heat or Heat/Cool Control
  • Up to 2 Independent Alarms
  • Optional RS-485 Communications
  • Auxiliary Setpoint Selection
  • 100 to 240 Vac or 24 Vac/Vdc Power Supply

Designed specifically for equipment manufacturers who demand tight , the 7EM offers outstanding performance and a variety of in a 1/8 DIN package. The cost effective 7EM is a configurable, Smart AT auto-tuning or /cool ler with thermocouple and RTD s. It is ideal for applications such as extrusion, food and environmental chambers in which the range does not exceed 999. It has a bright dual display for temperature and setpoint and 4 LED beacons for operating status. This particular model has 3 outputs. OP1 can be a time proportioned relay or SSR for ing. OP2 a relay or SSR for time proportioned cooling or Alarm 2. OP3 is an relay Alarm 2. Alarms can be , deviation or band type, direct or reverse, with automatic or manual reset, plus a unique er breakdown . The 7EM is available with a 100-240 Vac switching power supply or an 24 Vac/Vdc supply. Easy to understand, configure and use, it provides exceptional value to the industrial user. Features:

  • Thermocouple and RTD Input
  • PID and Smart AT Autotuning
  • NEMA 4X, IP65
  • 100 to 240 Vac Switching Power Supply
  • Algorithms for Heat or Heat/Cool Control
  • Up to 3 Outputs
  • Up to 2 Independent Alarms
  • Control Output Disable Function
  • Optional Heater Breakdown Detection

The 7 EF and HF models are designed for equipment manufacturers who demand tight and a full suite of advanced . Both these models offer outstanding performance as a 4-digit 1/8 DIN ler in a choice of vertical and horizontal format. Identical in , the 7EF and 7HF are configurable for or /cool PID with Smart AT auto or adaptive tuning, universal s, up to 4 outputs and up to 3 independent configurable s. They are ideal for demanding applications such as laboratory furnaces and ovens, autoclaves and chambers where 4 digits are required. They both have bright dual displays for temperature and setpoint and 10 LED beacons for operating status. Three outputs can be programmed as ing + 2 s or ing/cooling + 1 . Optional OP4 can be configured as Alarm 3 or as the er breakdown . Alarms can be , deviation or band type, direct or reverse, with masking and programmable automatic or manual reset. Both units have 2 setpoints, selectable by a logic . Transfer between setpoints can be step or ramp (2 selectable ramp rates). Optional RS-485 digital communications are available for connection to supervisory computers. A NEMA 4X front panel allows these instruments to work in severe environments. Both models feature:

  • Universal Input (6 T/C, RTD, mV, V, mA)
  • PID and Smart AT Autotuning
  • NEMA 4X, IP65
  • Algorithms for Heat or Heat/Cool Control
  • Up to 4 Outputs, 3 Independent Alarms
  • Setpoint Select from External Contact
  • Control Output Disable Function
  • Optional Heater Breakdown Alarm
  • Optional Digital Communications

The of the 7EC model include:

  • Universal Input (7 T/C, RTD, mV, V, mA)
  • PID and Smart AT Autotuning
  • NEMA 4X, IP65
  • Algorithms for Heat or Heat/Cool Control
  • Up to 4 Outputs, 3 Independent Alarms
  • Control Output Disable Function
  • Remote Selection of up to 4 Setpoints
  • Digital Communications

The full-feaured 7ES is designed for customers requiring 3-wire valve positioning with slidewire feedback and a full suite of advanced functions. The NEMA 4X rated 7ES is configurable for valve positioning or PID with Smart AT auto or adaptive tuning, universal s, up to 4 outputs, and up to 3 independent s. The 7ES has a bright dual display for temperature and setpoint, and 10 LED beacons to enhance operator information. OP1 and OP2 are interlocked relays for adjusting actuator position based on a slidewire feedback potentiometer. Alternately, OP1 can be used as a time proportioned relay output () and OP2 the same (cool) or an . OP3 and OP4 can be configured as s. Alarms can be high/low, deviation or band, direct or reverse, with masking and programmable automatic or manual reset. Features include:

  • Universal Input (7 T/C, RTD, mV, V, mA)
  • PID and Smart AT Autotuning
  • NEMA 4X, IP65
  • Open/Close Actuator or Servomotor Control
  • Algorithms for Heat or Heat/Cool Control
  • Up to 4 Outputs, 3 Independent Alarms
  • Up to 3 Logic Inputs for Function Select
  • Control Output Disable Function
  • Optional Digital Communications

Apart from these models, 3 new emerged from the production labs, categorized under the New Series 7. These are the FKS, LDE-LME and MKS models and they present slightly improved of the original Series 7 .

Offering such a large gamma of Barber Coleman and ler related products, this Company is a top affiliate to our site. HVAC Plus gives you the possibility to order their directly from our site, or any other components you might need. To check out specifications for each product, please give us a call.