AmAir 300X, AmAir 300E and AmAir 200E

General Information

1. Freight Terms: No freight allowed.

2. Underwriters' Laboratories, Inc. Classification:

  All AmAir filters are classified U.L. Class 2. Testing was performed according to U.L. Standard 900. Filters are not available in Class 1. (See AmAir 301).

3. Filter Dimensions:

  Actual filter face dimensions of Standard Size filters are listed by size and have a ±1/8” tolerance. Special size face dimensions are made to order ±1/8”. Actual filter depths are as follows:

  1” - 7/8” (± 1/16”)2” - 1 3/4” (± 1/16”)4” - 3 3/4” (± 1/16”)

4. Product Description: AmAir filters consist of a gold or white pleated media pack enclosed in a heavy duty frame.

    Media Frame Frame

  Media¹ Support Material Color

AmAir 300X w/Intersept® White Welded Wire Beverage Board White

AmAir 300X Gold Welded Wire Beverage Board White

AmAir 300E Gold Expanded Metal Beverage Board White

AmAir 200E Gold Expanded Metal Beverage Board White

¹ AmAir media is made of a blend of cotton and polyester fibers

a) Filter Assembly: The pleated media pack is bonded to the inside of the frame, forming a totally unitized construction.

b) Product Graphics: The filter frame is preprinted with the AAF logo, nominal size, actual size, U.L. Classification and air flow direction.

All Other Standard Sizes and Special Sizes: Strip Construction.

a) Media: Same as for Standard Sizes.

b) Media Support: A metal grid bonded to the media on the air leaving side.

c) Frame: Four pieces of heavy duty chipboard strips are stapled in each corner.

d) Media Retainer: Bottle Cap

1" Thick Filters 2" and 4" Thick Filters

Both length and width less than 20” No Retainers Both length and width less than 14" No retainer

Either length or width 20” or more Retainer on air leaving side only Either length or width 14" or greater and both less than 20" Retainer on air leaving side only

Multiple filters Retainers on both sides Either length or width 20" or greater Retainer on both sides

e) Filter Assembly: Same as for Standard Sizes.

f) Product Graphics: A label is applied to each filter showing the AAF logo, product name, nominal size, actual size, U.L. classification and air flow direction.

5. Packaging: AmAir filters are packed in a heavy duty corrugated fiberboard box.

6. Application Guide:

  AmAir filters are designed for industrial and commercial applications having light to medium dust loading conditions. They are used for general air filtration in all types of cooling, heating and ventilating systems.AmAir filters provide significantly higher efficiency than disposable panel filters, permanent filters or media pads in metal frames. They are highly recommended for applications where these types of filters are presently being used and a higher level of air cleaning is desired.

Return To Previous Page